Plantation shutters are becoming
an effective and popular way to add a stylish new look to your home. Both are
functional and attractive.
Parts of a plantation shutters
Traditional plantation shutters
have a fairly simple design. Plantation shutters normally consist of a set of
full-length vertical panels and can be divided into four main parts:
The horizontal slats located on
the top and bottom of the shutter are called "rails". Some plantation
shutters may also contain one or more horizontal rails in the center of the
blind, dividing the planting blind into separate levels.
 |
| Plantation shutters |
Located on the sides of the shutter is vertical "posts".
Blinds are the parallel slats
between the studs, which can be tilted and adjusted to allow more or less light
to pass through. Blinds can be made in several different sizes and shapes.
The "tilt bar" is the
mechanism that controls the movement of the fins. These also come in a variety
of styles.
Single Tilt Rods are a continuous vertical rod that connects and controls all grids simultaneously.
A split tilt bar is exactly that:
a tilt bar divided into individual pieces. This allows separate control of
multiple levels found on a plantation shutter panel, for example, adjusting the
upper level to allow lighter while keeping the lower-level shutters closed for
more privacy.
Hidden tilt rods allow the device
to be discreetly hidden behind the shutter panel.
Where do the plantation shutters
come from?
Blinds have been used for many
centuries. Some experts claim that they were used from ancient Greece, with
slats made of marble slabs. They were used before the glass was available, to
provide protection from the elements, such as rain, wind, and direct heat from
the sun's rays. They also effectively protected against insects and small
animals entering the building. The actual function of the blinds was
appreciated when these elements and pests were passed, and the blinds could be
opened, allowing fresh sunlight and a cool breeze to ventilate the
establishment.
Many old southern houses have
found the beauty and practicality of these shutters, incorporating them into
the design of decadent mansions found in Old South plantations. The term
"plantation shutter" is derived from these applications. These
components have seen a remarkably small change since these early days.
Modern plantation shutters
Today, plantation shutters are
available in a wide range of sizes, styles, and materials. They are found all
over the world, in all home styles. Most are made of hardwood like poplar or
bar and can be variously finished to add an architectural touch to residential
and commercial properties. Plantation shutters in rich woods such as cherry,
oak, mahogany, or walnut are exceptionally attractive.
The plantation shutters can be
used individually or attached to cover multiple or large windows. Many
plantation shutters manufacturers allow you to have custom blinds built to your
specifications to add a unique look to your home and make a design statement.
Today's plantation shutters still
offer the many practical features that previous generations have found so
useful. The plantation shutters are fully adjustable to allow more or less
light, provide privacy, and may even have insulation benefits.
No comments:
Post a Comment